Sahihin tesa 4963 Biyu{1}}Tafen PVC na gefe|110μm Plasticizer Migration Resistant Bonding - STK
STK yana ba da Tesa na gaske 4963 Biyu{1} Sided Tepe, ingantaccen masana'antu{2}}masu daraja 110μm (4.3-}mil) polyvinyl chloride (PVC) tef ɗin ɗaukar hoto wanda aka ƙera shi musamman don filastik mai mahimmanci{6}}mai iya jurewa filastik haɗin gwiwa da nauyi{8}}duty. Yana nuna ƙwaƙƙwaran ƙwanƙwasa, mai daidaita fim ɗin PVC wanda aka lulluɓe a ɓangarorin biyu tare da ƙwararrun ƙwararrun, babban tsarin mannewa mai ƙarfi, tesa 4963 yana warware gazawar masana'antar fa'ida ta daidaitattun kaset ɗin da ke lalata kan sinadarai masu aiki da sinadarai.
Ma'anar gefen fasaha na tesa 4963 shine rawar da yake takawa a matsayin shingen ƙaura mai yuwuwar filastik. Vinyl mai sassauƙa da sassa na PVC masu laushi na asali sun ƙunshi babban taro na masu filastik ruwa (esters) waɗanda ke ci gaba da ƙaura zuwa saman kan lokaci. Yayin da madaidaicin adhesives cikin sauri suna ɗaukar waɗannan esters kuma suna shiga cikin slush sinadarai marasa aiki, babban{3}}haɗin haɗin gwiwa-matrix mai laushi na tesa 4963 yana kore wannan ƙauran sinadari gaba ɗaya. Yana kiyaye mutuncin tsarin giciye -wanda ke da alaƙa a ƙarƙashin tasirin sinadarai na akai-akai, yana mai da shi zaɓi na farko don gyare-gyare na dindindin, tsattsauran tsari, da bayanan bayanan roba na roba.
Mabuɗin Siffofin & Fa'idodin B2B
Ga masu kera hatimin mota, manyan injiniyoyin laminate masu girma da yawa, da masu siyan ƙirƙira kayan aiki masu nauyi, tesa® 4963 yana ba da layin haɗin sifili{3} wanda ke ba da garantin ɗagawa sifili-
Garkuwar Hijira Plasticizer:An ƙirƙira tare da bayanin martabar juriyar sinadarai.Yana kawar da esters masu yin ƙaura gaba ɗaya, yana dakatar da liquefaction na dindindin, zubar da ruwa, ko laushin tsarin mannewa.
Maɗaukaki Mai Kauri-Cikin Matsalolin Matsala:Mai ɗaukar fim ɗin PVC mai ƙarfi yana tabbatar da kauri, daidaitattun riguna masu mannewa.Yana daidaita layukan extrusion mara daidaituwa, micro{0}}shafin yaƙe-yaƙe, da bayanan martaba marasa daidaituwa.na kowa a cikin sassa masu laushi masu laushi.
Kama Dindindin Nan take:Yana ba da m, m m manne ga low surface makamashi (LSE) roba roba, m vinyl abubuwa, da polyurethane (PU) kayan.kai tsaye a farkon aikace-aikacen danna - ƙasa.
Babban -Maganin Haɗin kai{1}Annen Taushi:Yana riƙe da cikakken maƙalli mai girma da kyakkyawan juriya mai ƙarfi a kan ci gaba da lodin thermal, yana tabbatar da cewa gefuna suna tsayawa har abada a ƙarƙashin saura mai rauni.
Maganar Ƙimar Fassara
Gina Samfura
| Nau'in mannewa | roba na halitta |
|---|---|
| Kayan tallafi | PVC fim |
| Launi | m |
| Jimlar kauri | 107 µm |
Kayayyakin Kayayyakin / Ƙimar Ayyuka
| Tsawaitawa a lokacin hutu | 30 % |
|---|---|
| Ƙarfin ƙarfi | 50 N/cm |
| Juriyar yanayin zafi ɗan gajeren lokaci | 70 digiri |
| Juriya mai ƙarfi a tsaye a digiri 40 | mai kyau |
| Juriya na Chemical | ƙananan |
| Juriyar tsufa (UV) | ƙananan |
| Juriya mai laushi | matsakaici |
| Taka | mai kyau |
| Juriya na danshi | mai kyau sosai |
Mannewa zuwa Dabi'u
| Adhesion zuwa ABS (na farko) | 5.4 N/cm |
|---|---|
| Adhesion zuwa ABS (bayan kwanaki 14) | 6.2 N/cm |
| Adhesion zuwa Aluminum (na farko) | 4 N/cm |
| Adhesion zuwa Aluminum (bayan kwanaki 14) | 5.2 N/cm |
| Adhesion zuwa PC (na farko) | 6.2 N/cm |
| Adhesion zuwa PC (bayan kwanaki 14) | 6.6 N/cm |
| Adhesion zuwa PE (na farko) | 3.8 N/cm |
| Adhesion zuwa PE (bayan kwanaki 14) | 4.5 N/cm |
| Adhesion zuwa PET (na farko) | 5.2 N/cm |
| Adhesion zuwa PET (bayan kwanaki 14) | 5.4 N/cm |
| Adhesion zuwa PP (na farko) | 4.3 N/cm |
| Adhesion zuwa PP (bayan kwanaki 14) | 6.6 N/cm |
| Adhesion zuwa PS (farko) | 5.3 N/cm |
| Adhesion zuwa PS (bayan kwanaki 14) | 6.6 N/cm |
| Adhesion zuwa PVC (na farko) | 5 n/cm |
| Adhesion zuwa PVC (bayan kwanaki 14) | 5.9 N/cm |
| Adhesion zuwa Karfe (na farko) | 5.9 N/cm |
| Adhesion zuwa Karfe (bayan kwanaki 14) | 6.1 N/cm |
Aikace-aikace
Motar PVC Wutar Wuta & Hatimi:Dindindin na ɗaure hatimin jikin PVC mai laushi, extrusions na roba na gilashin gilashi, da kofa na roba na roba{0}} bayanan martabar gas ɗin kan faifan abin hawa.
Premium Furniture Edge{0}}Banding & Veneers:Haɗe da gefuna masu sassauƙa na PVC, zanen kayan ado na vinyl mai laushi, da kayan gyara fata na wucin gadi na polyurethane zuwa allunan katako ba tare da baki ba{0}} yana ɗagawa akan lokaci.
Alamun Filastik mai laushi & Alamomin Suna:Hawan bajojin PVC masu laushi, sassauƙan alamar nunin vinyl, da bumpers masu kariya na polyurethane da ake amfani da su akan injinan masana'antu na waje ko nunin tallace-tallace.
Babban {{0}Sarrafa Gasket Roba:Laminating high - ƙaura roba roba, neoprene profiles, da EPDM takardar kayan a kan kwalaye na lantarki ko hanyoyin chassis na inji.
Ƙarfin Samar da Kayan Kwastomomi na STK: Daidaitaccen Tsagewar Al'ada & Mutuwar Abun Ciki{0}}Yanke
Sarrafa babban kaset na PVC- yana buƙatar ƙwararrun fasahohin musanya don hana nakasar juzu'i da kuma toshe baki{1}. STK yana haɓaka layin masana'anta kai tsaye:
Micro{0}} Madaidaicin Tsagewar Nisa Na Musamman
Masu ɗaukar hoto na PVC na iya samun sauƙin fuskantar karkacewar tashin hankali idan an tsaga ba daidai ba. STK na amfani da ci-gaba na zafin jiki - sarrafa lathe slitters don musanya tesa 4963 rajistan ayyukan zuwa madaidaicin faɗin ribbon (misali, 9mm, 15mm, 19mm, 25mm) tare da laser{9}} madaidaiciya, fuskokin nadi mai tsabta waɗanda ke ba da garantin tura injin mai santsi.
Mutuwar Musamman -Yanke Gyara Washers & Gasket
Yin amfani da manyan kayan aikin mu na stamping na sauri{0}, STK yana jujjuya kayan aikin tesa 4963 zuwa manyan firam ɗin da aka yankewa pre{2}, zanen gadon geometric na gasket na al'ada, da ƙunƙun madauri waɗanda aka kawo tare da tsawaita na'ura mai ban sha'awa ko PET ja{3} shafuka don rage tsadar taro.
Hot Tags: tesa® 4963 ninki biyu{1}} tef ɗin pvc|Plasticizer{2}} resistant bonding ga m kayan, China tesa® 4963 ninki biyu{4}} tef pvc|plasticizer - resistant bonding ga m kayan masana'antun, masu kaya, masana'anta
